DV130PD_AA2ANN_ENG
DVD PLAYER
OWNER’S MANUAL
MODEL : NDV-28
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
Contents
Introduction . . . . . . . . . . . . . . . . . .4-7 Operation . . . . . . . . . . . . . . . . . .14-18
General Features . . . . . . . . . . . . . . . . . . . . . .14
Additional Features . . . . . . . . . . . . . . . . . . . .15
Playing an Audio CD or MP3/WMA file . . . . .16
Programmed Playback . . . . . . . . . . . . . . . . .17
Erasing a Track from Program List . . . . . . .17
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .18
Moving to another File . . . . . . . . . . . . . . . .18
To rotate picture . . . . . . . . . . . . . . . . . . . . .18
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .18
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
About the
Symbol Display . . . . . . . . . . . . .4
Symbol used in this Manual . . . . . . . . . . . . . .4
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .4
Handling Discs . . . . . . . . . . . . . . . . . . . . . . .4
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . .4
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . .4
Maintenance and Service . . . . . . . . . . . . . . . .4
Types of Playable Discs . . . . . . . . . . . . . . . . .5
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .5
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .7
Remote Control Operation . . . . . . . . . . . . . .7
Remote Control Battery Installation . . . . . . .7
Reference . . . . . . . . . . . . . . . . .19-20
Language Codes . . . . . . . . . . . . . . . . . . . . . . .19
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .20
Installation and Setup . . . . . . . . .8-13
Setting up the Player . . . . . . . . . . . . . . . . . . . .8
DVD Player Connections . . . . . . . . . . . . . . . . .8
Video and Audio Connections to Your TV . . .8
Audio Connection to Optional Equipment . . .9
Displaying Disc Information on-screen . . . .10
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .10
General Operation . . . . . . . . . . . . . . . . . . .10
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .10
• Menu Language . . . . . . . . . . . . . . . . . . .10
• Disc Audio / Subtitle / Menu . . . . . . . . . .10
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . .10
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . . .10
• Display Mode . . . . . . . . . . . . . . . . . . . . .10
• Progressive Scan . . . . . . . . . . . . . . . . . .11
• TV Output Select . . . . . . . . . . . . . . . . . . .11
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
• Dolby Digital / DTS / MPEG . . . . . . . . . . .11
• Sample Freq. (Frequency) . . . . . . . . . . . .11
• Dynamic Range Control (DRC) . . . . . . . .11
LOCK (Parental Control) . . . . . . . . . . . . . .12
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . . .12
• Password . . . . . . . . . . . . . . . . . . . . . . . .12
• Area Code . . . . . . . . . . . . . . . . . . . . . . .12
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . .13
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . .13
• B.L.E. (Black Level Expansion) . . . . . . . .13
3
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
This manual provides information on the operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
About the Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Symbol Used in this Manual
Maintenance and Service
Refer to the information in this chapter before
Note:
Indicates special notes and operating features.
contacting a service technician.
Tip:
Indicates tips and hints for making the task easier.
Handling the Unit
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
ALL
All discs listed below
Keeping the exterior surfaces clean
DVD
DVD and finalized DVD R/RW
•
Do not use volatile liquids such as insecticide
spray near the unit.
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
VCD
Video CDs
ACD
Audio CDs
•
MP3
MP3 files
WMA
WMA files
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Do not use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
For details, please contact your nearest authorized
service center.
4
Types of Playable Discs
Regional Code
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled same
as the rear of the unit or “ALL”.
DVD
(8 cm / 12 cm disc)
Video CD (VCD/SVCD)
(8 cm / 12 cm disc)
Notes on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play.
Audio CD
(8 cm / 12 cm disc)
In addition, this unit plays DVD R/RW and CD-R/RW
that contains audio titles, MP3, WMA and/or JPEG files.
,
• If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
Notes:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD R/RW) disc
itself, some CD-R/RW (or DVD R/RW) discs
cannot be played on the unit.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
• Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD DEFINITION’
OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL
525p AND 625p DVD PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
5
Front Panel
a
b c
d
e
f
g
a POWER
f Remote Sensor
Switches the unit ON and OFF.
Point the remote control here.
b
c
N (PLAY)
Starts playback.
g Display window
Shows the current status of the unit.
x (STOP)
Stops playback.
d Disc Tray
Insert a disc here.
e
Z (OPEN / CLOSE)
Opens or closes the disc tray.
6
Remote Control
OPERATE
OPEN / CLOSE
Switches DVD Player ON and OFF.
Opens and closes the disc tray.
DVD MENU
TITLE
Accesses menu on a DVD disc.
Displays title menu, if available.
RETURN
b B v V (left/right/up/down) •
Removes the setup menu, displays
the video CD with PBC.
Selects an item in the menu.
ENTER •
Confirms menu selection.
• SCAN ( m / M )
Search backward or forward.
DISPLAY
• PLAY (
H
)
Accesses On-Screen display.
Starts playback.
PAUSE/STEP ( ; ) •
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
PROGRAM
Places a track on the program list.
CLEAR
Removes a track number on the
program list or a mark on the
MARKER SEARCH menu.
SKIP (. / >) •
Go to next chapter or track. Returns
to beginning of current chapter or
track or go to previous chapter or
track.
• REPEAT
Repeat chapter, track, title all.
STOP ( x ) •
Stops playback.
• A-B
Repeat sequence.
0-9 number buttons
Selects numbered items in a menu.
• RANDOM
Plays tracks in random order.
AUDIO •
Selects an audio language (DVD).
• ZOOM
Enlarges video image.
SUBTITLE •
Selects a subtitle language.
• MARKER
Marks any point during playback.
ANGLE •
Selects a DVD camera angle if
available
• SEARCH
Displays MARKER SEARCH menu.
SETUP •
Accesses or removes setup menu.
Remote Control Operation
Remote Control Battery installation
Point the remote control at the remote sensor and
press the buttons.
Detach the battery cover on the rear of the
remote control, and insert two batteries
(size AAA) with 3 and # aligned correctly.
Caution:
Do not mix old and new batteries and never mix
different types of batteries such as standard, alkaline,
etc.
7
Installation and Setup
Video and Audio Connections
to Your TV
Setting up the Player
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
Make sure the DVD player is connected directly to the
TV and not to a VCR, otherwise the DVD image could
be distorted by the copy protection system.
Video – Connect the VIDEO OUT jack on the
DVD player to the video in jack on the TV using
the video cable (V)
DVD Player Connections
Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
information.
S-Video – Connect the S-VIDEO OUT jack on the
DVD Player to the S-Video in jack on the TV using
the S-Video cable (S).
Component Video – Connect the COMPONENT
VIDEO OUT/PROGRESSIVE SCAN jacks on the
DVD Player to the corresponding in jacks on the
TV using an Y Pb Pr cable (C).
Progressive Scan
• If your television is a high-definition or “digital
ready” television, you may take advantage of
the DVD Player’s progressive scan output for
the highest video resolution possible.
• If your TV does not accept the Progressive
Scan format, the picture will appear scrambled
if you try Progressive Scan on the DVD Player.
Notes:
• Set the Progressive to “On” on the setup menu for
progressive signal, see page 11.
•
Set the progressive to “Off” by removing any disc
from the unit and close the disc tray. Confirm that
“no disc” is displayed on the display window. Then
press STOP and hold it for five seconds before
releasing it.
• Progressive scan does not work with the composite
video connection (yellow VIDEO OUT jack).
Caution:
Audio – Connect the left and right AUDIO OUT
jacks of the DVD Player to the audio left and right
IN jacks on the TV (A) using the audio cables.
Do not connect the DVD Player’s AUDIO OUT jack
to the phone in jack (record deck) of your audio
system.
You must set the TV Output Select option to use
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
and S-Video jacks. (Refer to page 11.)
8
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
Audio Connection to Optional
Equipment
receiver, or stereo system, using the audio cables (A).
Connect the DVD player to your optional equipment
for audio output.
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby Digital™, MPEG 2,
or DTS): Connect one of the DVD Player’s DIGITAL
AUDIO OUT jacks (COAXIAL X) to the corresponding
in jack on your amplifier. Use an optional digital
(COAXIAL X) audio cable.
Rear of DVD player
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel audio
/ video receiver that supports one or more of the
audio formats supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
X
A
Notes:
• If the audio format of the digital output does not match
the capabilities of your receiver, the receiver produces
a strong, distorted sound or no sound at all.
L
R
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
• Six Channel Digital Surround Sound via a digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and
the double-D symbol are trademarks of
Dolby Laboratories.
DTS and DTS Digital Out are trademarks
of Digital Theater Systems, Inc.
9
LANGUAGE
Displaying Disc Information
on-screen
LANGUAGE
Menu Language
Disc Audio
English
Original
Off
Some items can be changed using the menu.
1. Press DISPLAY during playback.
Disc Subtitle
Disc Menu
Original
2. Press b / B to select an item.
The selected item is highlighted.
Move
Select
Exit
3. Press v / V to change the setting. Press ENTER.
You can also use the number buttons if
Menu Language
appropriate (e.g. inputting the title number).
Select a language for the Setup menu and on-screen
display.
02/04
0:08:20
: Title(Track) Number,
: Time search
02/04
: Chapter Number (DVD disc only)
Disc Audio / Subtitle / Menu
Note:
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
If no button is pressed for a few seconds, the on-
screen display disappears.
Original – Refers to the original language in which
the disc was recorded.
Initial Settings
Other – To select another language, press number
buttons then ENTER to enter the corresponding 4-
digit number according to the language code list
on page 19. If you enter the wrong language code,
press CLEAR.
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 10 to 13.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
DISPLAY
To go to the next level:
Press B on the remote control.
DISPLAY
TV Aspect
4:3
Display Mode
Progressive Scan
TV Output Select
Letterbox
Off
To go back to the previous level:
YPbPr
Press b on the remote control.
General Operation
Move
Select
Exit
1. Press SETUP. The Setup menu appears.
TV Aspect
2. Use b / B to select the desired option then press
V or ENTER to move to the second level. The
screen shows the current setting for the selected
item, as well as alternate setting(s).
4:3 – Select when a standard 4:3 TV is connected.
16:9 – Select when a 16:9 wide TV is connected.
Display Mode
3. Use v / V to select the second desired option then
press B to move to the third level.
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.
5. Press SETUP, RETURN or PLAY to exit the Setup
menu.
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.
10
Progressive Scan
AUDIO
Progressive Scan Video provides the highest quality
pictures with less flickering. If you are using the
Component Video jacks for connection to a TV or
monitor that is compatible with a progressive scan
signal, set Progressive Scan to On. Press ENTER to
confirm your selection. The confirm menu will appear.
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type
of audio system you use.
AUDIO
Dolby Digital
DTS
Bitstream
Bitstream
PCM
Caution:
MPEG
Sample Freq.
DRC
48KHz
Off
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
If you set Progressive Scan to On in error, you must
reset the unit.
Move
Select
Exit
1) Press B. Select “Off” using the v / V buttons.
Dolby Digital / DTS / MPEG
The Setup menu appears.
Bitstream – Select “Bitstream” if you connect this
unit’s DIGITAL OUT jack to an amplifier or other
equipment with a Dolby Digital, DTS or MPEG
decoder.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
PCM (for Dolby Digital / MPEG) – Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
audio.
TV Output Select
Set the player’s TV Output Select options according to
the TV connection type.
YPbPr – When your TV is connected with the
COMPONENT VIDEO OUT/PROGRESSIVE
SCAN jacks on the DVD player.
Off (for DTS): If you select “Off”, the DTS signal is
not output through the DIGITAL OUT jack.
Sample Freq. (Frequency)
S-Video – When your TV is connected with the
S-Video jack.
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts any
96 kHz signals to 48 kHz so your system can decode
them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz.
Check the documentation for your amplifier to verify
its capabilities.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible. However, you may wish to
compress the dynamic range of the audio output (the
difference between the loudest sounds and the
quietest ones). This allows you to listen to a movie at
a lower volume without losing clarity of sound. Set
DRC to On for this effect.
11
buttons then press ENTER. Enter the 4-digit
password again to verify when the “Confirm
Password” section is highlighted, then. The “OK”
will be highlighted.
LOCK (Parental Control)
LOCK
Rating
Unlock
NEW
To change the password:
Password
Area code
P
L
When the “Old Password” section is highlighted,
enter the 4-digit password you have created then
press ENTER. The“New Password” section will be
highlighted. Enter a new 4-digit password using the
numbered buttons then press ENTER. Enter the
new 4-digit security password again to verify when
the “Confirm Password” section is highlighted. The
“OK” will be highlighted.
Move
Select
Exit
Rating
Blocks playback of rated DVDs based on their
content. Not all discs are rated.
4. Press SETUP to exit the menu.
If you forget your Security Code
1. Select Rating on the LOCK menu then press B.
If you forget your security code you can clear it using
the following steps:
2. Select a rating from 1 to 8 using the v / V buttons
and press ENTER. The password window will
appear.
1. Remove any disc from the unit and close the disc
tray. See that “nodISC” is displayed on the display
window.
Rating 1-8: Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
2. Press SETUP and setup menu apears on the TV
screen. Use the numbered buttons to enter the
6-digit number “210499”.See that “P-CLr” is
displayed on the display window.
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
3. If you have not entered password yet:
When the “New Password” section is highlighted,
enter a 4-digit password using the numbered
buttons then press ENTER. Enter the 4-digit
security password again to verify when the
“Confirm Password” section is highlighted. The
“OK” will be highlighted.
3. Enter a new password as described above.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list in
the reference chapter.
If you have entered password already:
Enter a 4-digit password you have entered using
the numbered buttons. The “OK” will be highlighted.
1. Select “Area Code” on the LOCK menu then press
B.
2. Select the first character using v / V buttons.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
3. Shift the cursor using B button and select the
second character using v / V buttons then press
ENTER, the password window will appear
Tips:
• If you make a mistake before pressing ENTER in
each section, press CLEAR to enter again or b
repeatedly to delete password numbers one by one
then correct it.
4. Press ENTER, the password window will appear.
5. If you have not entered password yet:
When the “New Password” section is highlighted,
enter a 4-digit password using the numbered
buttons then press ENTER. Enter the 4-digit
security password again to verify when the
“Confirm Password” section is highlighted. The
“OK” will be highlighted.
• If you enter the wrong password, you can not
proceed to the next step.
Password
You can create or change password.
If you have entered password already:
Enter a 4-digit password you have entered using
the numbered buttons. The “OK” will be
highlighted.
1. Select Password on the LOCK menu then press B.
The “Change” is highlighted
2. Press ENTER then the password window will
appear.
6. Press ENTER to confirm your Area Code selection,
then press SETUP to exit the menu.
3. To make a new password:
When the “New Password” section is highlighted,
enter a 4-digit password using the numbered
12
OTHERS
OTHERS
PBC
On
On
Off
Auto Play
B.L.E.
Move
Select
Exit
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Off: Video CDs with PBC are played the same
way as Audio CDs.
Auto Play
You can set up the DVD player so a DVD disc
automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
Note:
The Auto Play function may not work for some DVDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set your
preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
Note:
The B.L.E. function works NTSC system only.
13
Operations
General features
Buttons
Operations
Discs
ALL
Z (OPEN / CLOSE)
X (PAUSE)
Opens or closes the disc tray.
During playback, press X to pause playback.
Press X repeatedly to play Frame-by-Frame.
ALL
DVD
VCD
SKIP (. / >)
During playback, press SKIP (. or >) to go to the
next chapter/track or to return to the beginning of the
current chapter/track.
ALL
Press SKIP . twice briefly to step back to the previous
chapter/track.
SCAN (m / M)
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
ALL
DVD disc; 4 steps
Video CD, MP3, WMA, Audio CD ; 3 steps
DVD
ALL
VCD
While the playback is paused, press SCAN M
repeatedly to play in slow motion (4 steps, forward only).
REPEAT
A-B
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
Video CD, Audio CD, MP3/WMA discs: Track/All/Off or Normal
During playback, each press of A-B button to select point
A and point B and repeats a sequence from point A
(Starting point) to point B (End point).
DVD
ACD
VCD
VCD
DVD
ZOOM
During playback or pause mode, press ZOOM to enlarge
the video image (4 steps).
You can move through the zoomed picture using b B v V
buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback or in stop mode, press RANDOM for
random playback.
VCD
MP3
ACD
WMA
If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may
appears.
DVD
DVD MENU
(ANGLE)
The disc menu appears on the screen.
DVD
DVD
During playback of DVD disc contains scenes recorded
different camera angles, press ANGLE repeatedly to
select a desired angle.
DVD
DVD
(SUBTITLE)
(AUDIO)
During playback, press SUBTITLE repeatedly to select a
desired subtitle language.
VCD
During playback, press AUDIO repeatedly to hear a
different audio language or audio track.
14
Notes on general features:
Last Scene Memory
DVD
ACD
VCD
• On a Video CD with PBC, you must set PBC to Off
on the setup menu to use the repeat function (See
“PBC” on page 13).
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
• If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
• Zoom may not work on some DVDs.
Note:
• When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
will blink on the TV screen during scenes recorded
at different angles as an indication that angle
switching is possible.
This player does not memorize the scene of a disc if
you switch off the player before commencing to play
the disc.
Screen Saver
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes. If the
Screen Saver is displayed for five minutes, the DVD
Player automatically turns itself off.
Additional features
Time Search DVD
VCD
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
System Select
You must select the appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold PAUSE/STEP for more than 5 seconds
to be able to select a system (PAL, NTSC, or AUTO).
2. Press b / B to select the time clock icon and
“-:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
Marker Search DVD
To enter a Marker
VCD
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the marked
scene. Or, Press CLEAR and the marker number is
erased from the list.
4. You can play any marker by inputting its number on
the marker search menu.
15
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
Playing an Audio CD or
MP3/WMA file
Audio CD – Once you insert an audio CD a menu
appears on the TV screen. Press v / V to select a
track then press PLAY or ENTER to playback starts.
• The player cannot read an MP3/WMA file that has
a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files.
We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ?
* : “ < > l etc.
001 / 022
CD
Normal
00:00 /00:00
TRACK 01
TRACK 02
TRACK 03
TRACK 04
TRACK 05
TRACK 06
Program List
Add
PROGRAM
DISPLAY
MP3 / WMA
1. Press v / V to select a folder, and press PLAY or
ENTER to see the folder contents.
2. Press v / V to select a track then press PLAY or
ENTER. Playback starts.
• The total number of files on the disc should be less
than 648.
003 / 036
• This DVD player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality. Pre-recorded
DVDs are automatically set to these standards.
There are many different types of recordable disc
formats (including CD-R containing MP3 or WMA
files) and these require certain pre-existing
conditions (see above) to ensure compatible
playback.
00:00 /00:00
Normal
Music 01
Music 02
Music 03
Music 04
Music 05
Program List
Add
PROGRAM
DISPLAY
Tips:
• If you are in a file list on the MUSIC menu and want
to return to the Folder list, use the v / V to highlight
and press PLAY or ENTER.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
• Press DVD MENU to move to the next page.
Press TITLE to move to the previous page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG.
Press v / V to select a folder, and press ENTER to
see the folder contents.
16
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks (Audio CD,
MP3/WMA).
1. Insert a disc. (Audio CD, MP3 or WMA.)
2. Press v / V to select the desired file.
3. Press PROGRAM during playback or in the stop
mode.
Repeat press PROGRAM to place additional
tracks on the program list.
4. Press DISPLAY. Program List menu appear.
Press v / V to select the track you want to start
playing.
Press DVD MENU to move to the next page.
Press TITLE to move to the previous page.
001
/
022
003 / 036
CD
00:00 /00:00
Normal
00:00 /00:00
Normal
Program List
Program List
Music 01
Music 02
Music 03
Music 04
Music 05
Music 06
TRACK 01
TRACK 02
TRACK 03
TRACK 04
TRACK 05
TRACK 06
Delete
CLEAR
DISPLAY Return
CLEAR Delete
DISPLAY Return
Audio CD Menu
MP3/WMA Menu
5. Press PLAY or ENTER to start.
6. To resume normal playback from programmed
playback.
Press DISPLAY then select a track of list and then
press PLAY or ENTER.
Erasing a Track from program list
1. Use v / V to select the track that you wish to
erase from the program list.
2. Press CLEAR. Repeat to erase additional tracks
on the list.
For details on each operation item, refer to
relevant page.
17
Still Picture
Viewing a JPEG file
1. Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
Using this DVD Player you can view discs with JPEG
files.
2. To return to the slide show, press PLAY, ENTER or
press PAUSE/STEP again.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
Zoom
001 / 052
00:00 /00:00
Normal
Use zoom to enlarge the video image.
1. Press ZOOM during playback to activate the Zoom
function.
File 01
File 02
File 03
File 04
File 05
2. Each press of the ZOOM button changes the
screen in the sequence:
Program List
Add
PROGRAM
DISPLAY
100% → 150% → 200% → 100%
2. Press v / V to select a folder, and press ENTER
or PLAY. A list of files in the folder appears.
3
Use the b B v V buttons to move through the
zoomed picture.
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
4. To resume normal playback, press CLEAR or
press ZOOM repeatedly to select the 100%.
remote to highlight
PLAY.
and press ENTER or
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. Viewing
the file proceeding starts.
JPEG disc compatibility with this player is
limited as follows:
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
2048 pixels and burn another disc.
While viewing a picture, you can press STOP to
move to the previous menu (PHOTO menu).
Tips:
• Press DVD MENU to move to the next page.
Press TITLE to move to the previous page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG.
Press v / V to select a folder, and press ENTER to
see the folder contents.
• The total number of files and folders on the disc
should be less than 648.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
Moving to another File
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
Press SKIP (. or >) once while viewing a
picture to advance to the next or previous file.
• File names without “.jpg” extension will not be
able to be read by this DVD player. Even though
the files are shown as JPEG image files in
Windows Explorer.
To rotate picture
Press b / B during showing a picture to rotate the
picture clockwise or counter clockwise.
18
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
Area Codes
Choose a Area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
FI
FR
DE
GB
GR
GL
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
Herd and Mcdonald Islands HM
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
HK
HU
IN
ID
IL
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
IT
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
JM
JP
KE
KW
LY
LU
PT
RO
El Salvador
Zimbabwe
19
Troubleshooting
Possible Cause
Correction
Symptom
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
No power.
• No disc is inserted.
• Insert a disc. (Check the disc indicator
in the display window is lit.)
The power is on, but
the DVD player does
not work.
• The TV is not set to receive DVD
signal output.
• Select the appropriate video input
mode on the TV.
No picture.
• The video cable is not connected
securely.
• Connect the video cable securely.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
No sound.
• The power of the equipment
connected with the audio cable is
turned off.
• Turn on the equipment connected with
the audio cable.
• The AUDIO options are set to the
wrong position.
• Set the AUDIO option to the correct
position, then turn on the DVD player
again by pressing POWER.
• An unplayable disc is inserted.
• The rating level is set.
• Insert a playable disc. (Check the disc
type and regional code.)
The DVD player does
not start playback.
• Change the rating level.
• The remote control is not pointed at
the remote sensor on the DVD player.
• Point the remote control at the remote
sensor of the DVD player.
The remote control
does not work properly.
• The remote control is too far from the
DVD player.
• Operate the remote control closer to
the DVD player.
• The progressive scan is ON at a
normal TV which cannot receive
progressive scan.
• Turn Off the progressive scan.
See Page 11.
The picture is not
correct, such as double
picture, red picture or
no colour.
• The TV OUTPUT SELECT (SETUP-
DISPLAY) is set at S-Video, while the
DVD is connected to YPbPr.
• If connection is using Component
(YPbPr), then ensure YPbPr is selected
from (SETUP-DISPLAY-TV OUTPUT
SELECT). See page 11.
• The TV OUTPUT SELECT (SETUP-
DISPLAY) is set at YPbPr, while the
DVD is connected to S-Video.
• If connection is using S-VIDEO, then
ensure S-VIDEO is selected from
(SETUP-DISPLAY-TV OUTPUT
SELECT). See page 11.
20
Specifications
General
AUDIO OUT:
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Power requirements: AC 200-240 V , 50/60 Hz
Power consumption: 8 W
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
Dimensions (Approx.):
360 x 35 x 242 mm (14.2 x 1.4 x 9.5 inches)
(W x H x D) without foot
System
Laser:
Semiconductor laser, wavelength 650 nm
Weight (Approx.): 1.7 kg (3.7 lbs)
Signal system: NTSC / PAL
Operating temperature:
5 °C to 35 °C (41 °F to 95 °F)
Frequency response:
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Operating humidity: 5 % to 90 %
Outputs
Signal-to-noise ratio:
More than 100 dB (ANALOG OUT connectors only)
VIDEO OUT:
1 V (p-p), 75 Ω, sync negative, RCA jack x 1
Harmonic distortion: Less than 0.02%
S-VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
Dynamic range:
More than 95 dB (DVD/CD)
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Accessories:
Video cable (1), Audio cable (1), Remote control (1),
Batteries (2)
Note: Design and specifications are subject to change prior notice.
21
NEC Australia Pty. Ltd.
ABN 86 001 217 527
Home Electronics Group
NEC Service Centres
PH:131-632
• New South wales
Sydney
184 Milperra Rd, Revesby 2212
131-632
131-632
Newcastle
120 Parry Street, Newcastle West 2302
• Victoria
Melbourne
Unit 1/6 Garden Road, Clayton 3168
131-632
• Queensland
Brisbane
Southport
Unit 4 / 305 Montague Road, West End 4101
Shop 1, 48 Ferry Road, Southport 4215
131-632
131-632
• South Australia
Adelaide
84A Richmond Rd, Keswick, 5053
131-632
131-632
• Western Australia
Perth 45 Sarich Court, Osborne Park 6017
For Service in outer areas, please contact your NEC retailer for the address of the nearest
Authorised NEC Service Centre
NEC Australia Pty. Ltd.
Home Electronics Group
244 Beecroft Road EPPING 2121
Tel: 131 632
Fax: (02) 9877 2353
P/NO. : 3834RD0096Y
|