Murphy Automobile Parts PV10 User Manual

0810305  
10-21-08  
Section 78  
PowerView- Model PV10 – Diagnostic Display  
Features  
Display supports electronically controlled engines and  
equipment applications that use SAE J1939 Controller Area  
Networks.  
Displays Active and Stored diagnostic trouble codes for  
diagnosing equipment malfunctions.  
Displays Engine Hours, SPN, FMI, and OC information on a  
graphic display.  
Provides enhanced visual alarm indication using Ultra-bright  
ALARM or SHUTDOWN LEDs (amber and red).  
Simple installation and connections to the system bus.  
Rugged design for demanding applications includes backlit  
display and is sunlight viewable.  
Product Description  
The PV10 Diagnostic display is a CAN device that receives data from a  
controller or ECU and then displays Active and Stored Fault messages and  
Engine Hours.  
The default mode provides hourmeter data from the ECU for cumulative  
engine hours.  
The PV10 is equipped with two buttons to quickly select between Active or  
Stored Faults, a graphic display, two LED to indicate the Active fault's Alarm  
or Shutdown status in a sealed enclosure that matches the PowerView line  
of gages.  
Fault Messages  
Fault messages are formatted to display SPN (Suspect Parameter Number), FMI (Failure Mode Indicator) and OC  
(Occurrence Count) codes that conform to the SAEJ1939 protocol.  
Bezel Styles  
AB  
A
BB  
DB  
A-20 Style  
A-20 Style  
Low Profile SAE Style  
Low Curved Style  
 

Miele Convection Oven H4081 BM User Manual
Miele Freezer F1801VI User Manual
Miele Kitchen Grill CS 1312 User Manual
National Instruments Network Card NI WLS ENET 9163 User Manual
Navman GPS Receiver N60i User Manual
NDC comm Stereo System NWA0518 User Manual
NEC Car Stereo System SB 06WC User Manual
Olympus Camera Accessories V326110SU000 User Manual
Onkyo Stereo Receiver HT RC470 User Manual
Palsonic Flat Panel Television TFTV1720D User Manual